Open as PDF
Digital zoom and image stabilizer are not available after “AUTO REC” is
REC” cannot be used together with “TIME-LAPSE RECORDING”
. When both are set, priority is given to “TIME-LAPSE RECORDING”.
The auto power off and power-saving modes are not available after “AUTO
REC” is set.
Recording stops when there are no changes for 5 seconds during video
Settings of “AUTO REC” are not saved when the power is turned off.
may not start when the movements of the subject within the red
frame are too fast or the changes in brightness are too small.
Recording may start due to changes in brightness even if there is no
movement within the red frame.
While zooming, recording cannot be started.
Remaining Recording Time/Battery Power
You can check the remaining video recording time on the SD card as well
as the remaining battery power.
To select/move cursor towards up/left or down/right, press the button UP/<
Open the LCD monitor.
Display the remaining recording time.
To display the remaining battery power, press OK/INFO.
To exit the display, press MENU.
Display the remaining battery power.
To exit the display, press OK/INFO.
battery power will not be displayed when the AC adapter
You can change the video quality from the remaining recording time
Select the video quality with the UP/< and DOWN/> buttons and press