Filter
Top Products
98
Applications
Specifying an Output
1 Select the camera for specifying the event from
the [Defined events] list on the [I/O Setup]
screen
2 Click the [Add new output event...] button
●
The [Add New Output] screen appears.
3 Specify the output connection destination,
output holding time, and output name
Note :
●
The [Add new output event...] button is disabled if there is no
output available for use by the network camera.
[Advanced] Screen
The [Advanced] screen enables you to specify network settings for
handling events.
1 Click the [Advanced...] button on the [I/O Setup]
screen
●
The [Advanced] screen appears.
2 Specify the following items.
Camera Input/Output Port
and Events (continued)
Item Description
A External
output
connected to
Displays the device name for which
output is specified. (This is a read-only
field.)
B Output
connected on
For selecting which destination to
connect the output to.
C Keep output
for
For specifying the output holding time in
units of 1/10 seconds or seconds.
D External
output name
For specifying a name for the output.
Memo :
●
The following characters cannot be
used as part of the event name.
< > & ^8217 ^8220 \ / : * ? | [ ]
E Test Output
Click this to perform a test on the output
settings.
2
1
A
D
B
C
E
[Add new output] Screen
Item Description
A Ftp Server
Port
For specifying the port number to use for
sending event information from the device to
the surveillance system via FTP. (Specify a
number between 1 to 65535.)
B Alert Port
For specifying the port number to use for
handling warnings related to events, including
generic events. (Specify a number between 1
to 65535.)
C SMTP
Port
For specifying the port number to use for
sending event information from the device to
the surveillance system via SMTP. (Specify a
number between 1 to 65535.)
[I/O Setup] Screen
Click
A
B
C
D
[Advanced] Screen