JVC LST0728-001B Security Camera User Manual


 
141
1 Click [HDD Utility] under [Main Menu]
(A Page 116)
The [HDD Utility] screen appears.
2 Click [Details]
3 Enter the [User name] and [Password] that are
configured on the NAS device for access to NAS
in [NAS User Settings], and click [Set]
4 Enter the IP address and shared name of the
NAS device in the format of A IP Address
shared nameB in the [Address] field under [NAS
Drive], followed by clicking [Add]
Example)
5 If the NAS device is the only device for
recording images, deselect the [Enable
archiving to internal HDD] check box
6 Click [Close]
7 Click [Main Menu]-[Camera Record Setting]-
[Archive Setup...] (A Page 108)
The [Archive Setup] screen appears.
8 Deselect the [Automatic path selection] check
box
9 Configure each drive as destinations for storing
images of the respective cameras.
Note :
Performing the above setting only after the NAS device setting is
complete and when the device is connected to the network.
If you change the archive destination after applying the setting,
playback of previously archived data will fail.
The configurable items may differ according to the camera in
use.
Specify the user name with a different name from the [OS
Setting] (
A
Page 72) host name under the user setting for NAS
connection.
Note :
After configuring the NAS drive, an error message will appear on
the NVR Viewer for several minutes, and live images may not be
displayed during this interval.
Configuring NAS
192.168.0.200
2
3
4
5
6
[HDD Utility] Screen
8
[Archive Setup] Screen