Filter
Top Products
32
Basic Operation
The following are procedures to open the main menu, which is used
for specifying various settings.
Note :
●
The input ports do not operate when the main menu is
displayed. Inputs such as alarms will also be ignored when the
main menu is displayed.
[Input ports] (A Page 15) (VR-N1600U/E)
[Input ports] (A Page 19) (VR-N900U)
1 Press and hold the [REC/STOP] button for at
least 2 seconds
●
Recording stops.
Memo :
●
When in the recording control mode, press and hold the [REC
CONTROL] button for at least 2 seconds to switch the recording
control mode off and stop recording.
●
For details on the recording mode, refer to [Recording Modes]
(
A
Page 52).
2 Press and hold the [FUNCTION] button, and
press the [REC CONTROL] button at the same
time
●
The main menu appears.
●
Select a menu with the [2/
D
] or [10/0/
E
](8/
E
) button and
press the [16/ENTER](ZOOM IN/ENTER) button to open
the selected setting screen.
`
The same operation can be done using the [SKIP] button.
3 Select an item
●
Select the required item using the [2/
D
] or [10/0/
E
](8/
E
)
button and specify the settings.
`
●
Press the [16/ENTER](ZOOM IN/ENTER) button to save
the settings, and press the [13/CANCEL](ZOOM OUT/
CANCEL) button to close the screen and return to the
main menu.
`
Memo :
●
To exit the main menu, press the [13/CANCEL](ZOOM OUT/
CANCEL) button.
`
Note :
●
In some occasions, the NVR Viewer may appear instead when
you try to display the main menu while the NVR Viewer is
running. In this case, press the [LIVE/BROWSE] button on the
front panel and perform the operation to display the main menu
again.
Opening the Main Menu
OPERATE
RECCONTROL
LIVE/BROWSE
SELECT
PTZ/PRESET
SERIAL
㧝 㧞 㧟
㧠
㧡
㧢*1/'
㧣
㧥
㧤
CANCEL Z OOMOUT ZOOMIN ENTER
WARNING
ALARM
HDD
LOCK
SEARCHFUNCTION ALARMCLEARKEY REC/STOP STOP(PB) PLAY
SKIP
REV F WD
VR-N900U
VR-N1600U/E
[13/CANCEL]
Button
[16/ENTER] Button
[REC CONTROL]
Button
[REC/STOP]
Button
[FUNCTION]
Button
[2/D] Button
[10/0/E] Button
[SELECT] Button
[SKIP] Button
[ZOOM OUT/
CANCEL] Button
[ZOOM IN/ENTER] Button
[REC CONTROL]
Button
[REC/STOP] Button
[FUNCTION]
Button
[2/D] Button
[8/E] Button
[SELECT] Button
[SKIP] Button
ⅷ For details on the main menu settings, refer to
[Main Menu List] (A Page 68).
[Main Menu](VR-N1600U/E)
[Main Menu](VR-N900U)