JVC LST0728-001B Security Camera User Manual


 
115
This option enables you to specify the language you want to use.
Memo :
The functions and GUI (graphical user interface) are the same
as the [Selecting a language] (
A
Page 23) screen that is
displayed when this unit is first switched on.
1 Exit NVR Viewer
2 Select [Language Setting] from the main menu
The [Language Setting] screen appears when the NVR
Viewer is switched on for the first time.
3 Select a language
Click on the [Language Selection] pull-down tab and
select the language you want to use.
4 Click the [OK] button
Click the [OK] button to enable your selection. The system
will reboot when the language setting is changed.
Note :
Specify the language settings immediately after this unit has
started up.
When language setting is complete, the device automatically
reboots. It may take about five minutes to exit the settings.
Set the language after shutting down the NVR Viewer.
Never turn off the power while setting the language.
Language Setting
3
4
[Language Selection] Screen