Filter
Top Products
6-15
6
General
Operating in Auto-Multi Program
1 Press and hold the MDE button
and rotate the Main-Command
dial until P appears in the
Camera Status LCD panel and
viewfinder.
If the exposure meter and LCD
indications automatically turn
Off, turn them On again by
lightly pressing the Shutter
Release button.
2 Look inside the viewfinder,
compose your shot, lightly press
the Shutter Release button, then
confirm focus and automatically
set the shutter speed/aperture
value.
To change the shutter speed/
aperture combination, refer to
the “Operating in Flexible
Program” section on page 6-17.
3 Fully depress the Shutter
Release button to capture an
image.
SET
FNC
( )
MDE
Ps
BUSY
RESET+/-
F
PRINT
TYPE
F
F