Filter
Top Products
3-11
3
Configuring
Specifying Display Off When Using Adapter
By default, the Image LCD panel turns Off even when the camera is powered by an AC
adapter.
Setting The PowerSave Time
You can change the PowerSave time by choosing PowerSave Time from the Properties
menu, then using the same procedure described for changing Display Off time to alter the
PowerSave time. Refer to “PowerSave Mode” on page 2-10.
1 With the Properties menu
displayed, select Display Off
Using Adapter.
The Display Off Using Adapter
screen appears.
2 Press and hold the SELECT
button and rotate the Main-
Command dial to highlight Yes
or No.
If you choose No, the Image
LCD panel will not turn Off at
the Display Off time (page 3-6)
when an AC adapter is
connected.