Filter
Top Products
11-11
11
Camera Care
Loading Camera Firmware
Firmware is the software program which runs within the camera and controls its operation.
As changes are made to the firmware, new versions may become available. You should
occasionally check the Kodak web site (http://www.kodak.com) to see if there is a new
firmware version. You can download the firmware from the Kodak WWW site or obtain it
from your camera dealer.
There are two ways to load firmware:
✔ Using the Kodak Software. This method is described in the KODAK
PROFESSIONAL DCS Host Software User’s Manual on the DCS Host Software
CD included with your camera.
✔ Copying from the PC Card (see below).
1 Download or copy the firmware
files to your computer.
2 Install the firmware on your
computer using the installation
software which accompanied the
firmware.
3 Connect your camera to a
Kodak-specified AC adapter
and/or use fresh batteries.
☛ Your camera can load
firmware while it is powered
by either the AC adapter or
batteries, but we recommend
that both power sources be
used.
IMPORTANT:
Loss of power could corrupt the
firmware.