Filter
Top Products
6-34
Single Servo AF Operation
With a Stationary Subject
With a Moving Subject
Lightly press the Shutter Release
button.
While autofocusing, a or (for
front or rear focus) may appear.
When the subject is in focus, the
lens stops moving, the in-focus
indication appears in the
viewfinder, and the focus locks. If
the subject moves, remove your
finger from the Shutter Release
button, then lightly press again to
restart autofocus.
Lightly press the Shutter Release
button to automatically activate
focus tracking. Confirm that a
appears in the viewfinder, then fully
depress the Shutter Release button.
(The Shutter Release button can be
depressed without confirming the
indication; as soon as the subject
comes into focus, the shutter will be
released.)
Even when your camera is in Single
Servo AF mode, it will recheck
focus before every shutter actuation
when your finger has not been lifted
from the Shutter Release button.
When the camera is set to Single
Servo AF mode and Continuous
Shooting Drive mode, you may
notice some slight auto focus
operation between shots.
F