Filter
Top Products
Appendix B
B-1
Appendix B - Troubleshooting
If you run into a problem operating your camera, check the following table to see if you
can find the cause of the problem. If the trouble persists, take the camera to your nearest
service representative.
Symptom Indication Cause Remedy
The shutter
doesn’t release.
The PC Card icon
does not appear in
the Image LCD
panel.
The PC Card is not
inserted, or not
inserted properly or
is in the wrong slot.
Insert a PC Card or check
the insertion. Refer to
“Inserting a PC Card” on
page 4-2.
Error message in the
Image LCD panel
states that no PC
Card is installed.
Card not formatted
message appears in
the Image LCD
panel.
The PC Card is not
formatted.
Format the PC Card. Refer
to “Formatting a PC Card”
on page 4-4.
The PC Card Busy
LED blinks.
The Images
Available indicator
on the Image LCD
panel reads 0.
The PC Card is full. Insert a different PC Card
or delete some images.
Refer to “Inserting a PC
Card” on page 4-2 or
“Deleting More Than One
Image” on page 9-13.