Filter
Top Products
7-15
7
Special
Changing ISO Settings
In BASIC mode, the ISO is ISO 200 ( ). (While BASIC mode is available on your
camera, ADVANCED mode is recommended for the best results.)
You can manually set ISO in ADVANCED mode. The range for the DCS 315 is 100-400,
and the range for the DCS 330 is 125-400.
Setting Auto ISO (ISO 200)
1 Press and hold the FNC button
and rotate the Main-Command
dial until the function set
indicator ( ) appears in the
Camera Status LCD panel and
ISO starts blinking.
2 Press and hold the SET button
and rotate the Main-Command
dial until appears.
A
SET
FNC
( )
MDE
Ps
BUSY
RESET+/-
A
AF-S
S
F
TYPE
PRINT
AE
QR
ISO
A
BKT
IN