Filter
Top Products
8-40
Auto Exposure Bracketing [AEB]
Use auto exposure bracketing to take a sequence of pictures at different exposures. When
this function is set, the camera automatically takes three exposures in sequence while
shifting the exposure for each image. The bracketing amount can be set in 1/3-stop
increments up to +/-3 stops from the metered exposure value. When the Shutter button is
pressed, three frames are exposed according to the current Drive mode in the sequence:
underexposure, correct (metered) exposure, and overexposure. (Refer to Chapter 9 for
more information on Drive mode.)
☛ If auto exposure bracketing is used with custom function F-12 set to mirror-up mode,
the camera will operate in single exposure mode regardless of the current Drive
mode (single exposure, continuous exposure).
( page 6-6)
The AEB step amount can also be
input in 1/2-stop increments.
The shooting sequence can be
changed to correct (metered)
exposure, underexposure, and
overexposure. This function also
lets you set the AEB step amount by
simultaneously pressing the AF
Mode and Shooting Mode selectors
while turning the Main dial.
Underexposure (-1/3) Correct (metered) exposure (0) Overexposure (+ 1/3)
Custom Function F-6
Custom Function F-9