Filter
Top Products
4-2
Dual Slots for PC Cards
Your camera has two PC Card slots. With Type II PC Cards, you can use one or both slots.
With Type III PC Cards, only one slot can be used. The card in the bottom slot is referred
to as CARD0, and the card in the top slot is referred to as CARD1.
If using only one card, insert it in either slot. With two cards, the first card inserted is the
active card. When you capture or delete images, they are saved to or deleted from the
active card.
IMPORTANT:
Your camera uses 3 volt or 5 volt PC Cards. When you use two cards, they must both
have the same voltage. If you insert two cards with different voltages, neither is
powered. A “Card Voltage Mix” message will appear. You would need to remove one of
the cards so that the other can be powered.
CARD1
CARD0