Filter
Top Products
3-8
If your battery charger does not function as expected, check the following:
✔
Be sure the wall adapter is properly connected.
✔
Be sure there are no foreign objects lodged in the pockets.
✔
Be sure the batteries are inserted so that they properly mate with the connector in
the bottom of the pocket.
☛ No harm will come to your batteries if you leave them in the charger for an extended
period of time.
5 Insert one or two batteries into
the battery charger slots.
On average, the charger will
completely charge a battery in
approximately one hour. If two
batteries are inserted, they are
charged sequentially.
6 Once the green light turns on,
wait two hours then remove the
battery or batteries from the
charger.
If you don’t wait two hours,
batteries will only be charged to
80% of capacity.
7 Insert a charged battery into the
camera.
8 Close the camera door.
The Battery icon appears on the
Back LCD panel when there is a
battery in the camera, the
camera is on, and the camera
has not entered PowerSave
mode. Refer to “PowerSave
Mode” on page 3-10.
The Battery icon is not displayed
if the AC adapter is connected.