Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14 Using the Camera
Recording Sound (Optional)
You can record sound on the PCMCIA card via a microphone built into
the camera by following these steps.
1. Turn on and wake the camera system.
2. Hold the camera back approximately six inches (15 cm) from your
mouth.
3. Press and hold the record button.
CARD BUSY
MIC
DELETE SCSI
ID
MIC BUTTON
Microphone
Record button
4. Speak into the microphone.
5. Release the record button; the red Card Busy light blinks as the data
are recorded on the PCMCIA card.
The center dot of the recording level meter (also called the disk indicator)
on the camera back LCD comes on when the recording button is pressed