Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Kodak Driver Software 8-71
“There is no PCMCIA card
in the camera. You can
insert a PCMCIA card
now, or work without a
card in Test Shot view.”
You are trying to take a
picture but there is no
PCMCIA card in the
camera.
As indicated, you can insert a
PCMCIA card now and continue to
shoot normally, or you can work in
Test Shot view without a card.
“There is not enough
memory to complete the
operation. Close
unneeded windows, if
opened, and try again.”
There is not enough
memory to complete the
operation.
If unneeded windows are opened,
close them and try the operation
again.
Or quit Photoshop and increase its
memory size. Restart Photoshop
and try the operation again.
“There is not enough
memory to hold all the
sounds for this folder. You
will not be able to play
the sounds for all images
in this folder.”
There is not enough
memory available in
your computer, and even
the small amount of
memory allocated for
each sound by the
TWAIN driver has
exhausted available
memory.
Divide the images in the folder,
moving images for which there are
sounds to a new folder.
“TWAIN DCS source
error. Low memory
condition encountered.
Free up some memory
and try again. (Be certain
the computer system
meets the minimum
memory requirements.)”
There is not enough
memory to complete the
operation.
Be certain that the computer meets
the minimum system requirements
(refer to Chapter 1). Shut down
other applications if they are
running and try again.
“TWAIN DCS source
error. (Remaining wording
of message varies). Try
again and/or reinstall the
driver.”
A problem has occurred
with the software driver.
Try the operation again. If
necessary, reinstall the TWAIN
driver and try again. If the problem
continues, contact Kodak.
Message Possible Cause Suggested Solution