Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Camera 7-47
3. CAUTION: As you complete this step be certain that the thin wires
recede into their openings in the KODAK camera back.
Hold down the camera back with one hand while you use the other
hand to push the camera body into place against the camera back.
4. Tighten the mounting screw.
Mounting screw
.
5. Reposition the buckle on the lower end of the handstrap and recon-
nect the Velcro.
The camera is now ready.