Filter
Top Products
24
Installing
Placing Batteries
Placing Batteries
Warning
(Failure to adhere to the following points may result in death or serious injury.)
Do not dispose of batteries in fire, short their terminals, apply heat to them or disas-
semble them. Doing so may cause explosion or liquid leakage, resulting in fire or
injury.
Should liquid leak from battery and contact to eye, wash liquid off with clean
water without rubbing eyes and immediately seek for medical professional's
advice. In case liquid contacts with hand or clothes, wipe liquid off with plenty
of water. Avoid further use of such instrument.
Insulate battery contact with such object as tape in disposing of batteries. Contact
to other metal object may cause heat, explosion or fire. Follow local regulation for
proper disposal or recycle of batteries.
Should instrument or AC adapter be damaged or smoke or odd smell be gen-
erated, do not keep using it without correction. Doing so may cause fire. In
such situations, switch power off immediately, unplug AC adapter (or remove
batteries in using ones) and contact the nearest KONICA MINOLTA SENSING
authorized service facility.
Caution
Do not use batteries other than those specified by KONICA MINOLTA SENS-
ING. Or do not use new and old batteries together or combine different type
batteries. When installing batteries in this instrument, make sure that they are
correctly placed according to (+) and (-) marks. Failure to any of these may
damage battery or leak liquid, resulting in fire, injury or air pollution.
Note on Use
Remove batteries if unused for 2 weeks or longer. If not, liquid in battery may leak, which
would damage this instrument.
To avoid draining of battery, sleep mode setting is available for the case not using for 30
minutes. See p.56 for details.
If batteries are installed and AC adapter is used, power is supplied through AC adapter.
Remaining Battery Level Mark
Mark indicating remaining battery level appears on bottom left of LCD screen.
mark indicates that remaining battery level is low. If this appears, replacement with
new ones or AC adapter connection is recommended.
mark indicates that there is no battery left. This instrument cannot be used. Re-
place with new ones or connect AC adapter.
Make sure that power switch is off before replacing batteries or connecting AC adapter.
(Failure to adhere to following points may result in injury or
damage to instrument or other property.)