Filter
Top Products
91
Measurement
3.
Press
MEMORY
key.
If [MAN NUM] has been set for memory
channel update, measurement value
is to store in selected channel.
In case of [AUTO NUM], measurement
value is to store in selected channel
and next channel number appears.
Maximum value/minimum value is
stored in max/min value measurement.
(Note that measurement value for every
measurement is stored when [AUTONUM]
is set in max/min value measurement.)
If set for [AUTO NUM] or [AUTOSAVE] and
all memory channels have been used up,
M000 is to use again to be overwritten.
In case that stored data already exists in
the channel to store in, warning message
"OK TO OVERWRITE?" appears.
If OK, press ENTER key, and if not, ESC key.
This warning message can be set
not to appear. (See p.48.)
MEMORY
CH01:
<
DEFAULT
>
Lv 20.80
cd/m
2
x 0.4476
y 0.4477
<
MODE
>
SINGLE
[ ] [ 2° ]
<
ANGL
>
1
°
VIEW
<
SPD
>
AUTO
<
SYNC
>
60.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
M001 :
Lv 20.80
x 0.4476
y 0.4477
<
ANGL
>
1
°
VIEW
<
SPD
>
AUTO
<
SYNC
>
60.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
M
002
: (NO DATA)
Lv
------
x
------
y
------
<
ANGL
>
1
°
VIEW
<
SPD
>
AUTO
<
SYNC
>
60.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
M001 :
Lv
------
x
------
y
------
CH01:
<
DEFAULT
>
Lv 20.80
cd/m
2
x 0.4476
y 0.4477
<
MODE
>
SINGLE
[ ] [ 2° ]
CH01:
<
DEFAULT
>
Lv ------
cd/m
2
x ------
y ------
<
MODE
>
SINGLE
[ ] [ 2° ]
OK TO OVERWRITE?
OK : [ENTER]
CANCEL : [ESC]