Filter
Top Products
62
Measurement
Preparation
Calibration
Calibration Channel
There are 21 calibration channels from CH00 to CH20.
Following settings are available for all channels.
(1) Correction coefficient of user calibration
(2) Target color
(3) CH ID name
These are commonly used among each measurement mode of L
v
xy, L
v
u’v’, L
v
T∆uv, XYZ,
and dominant wavelength in one channel.
CH00 is for measurement based upon KONICA MINOLTA SENSING’s calibration stan-
dard. Its calibration correction coefficient has been set and is unchangeable. Only target
color and CH ID name settings are available.
To switch calibration channel, press either or key in SHIFT mode to switch one ap-
pearing on LCD screen.
CH ID name can be given to each channel through key operation. CH ID name is shown
on LCD screen together with calibration channel.