Filter
Top Products
31
Setting
5.
Press either
or
key to move
inversion cursor from [NO SYNC]
to [SYNC] so that light source
pulse frequency can be entered.
6.
Press either
or
key
to set arbitrary value.
key: 0 to 9 (0 to 2 in 100 position) in descending
order, decimal point and space available.If kept
pressed, numerical value continuously increases.
key: 9 to 0 (2 to 0 in 100 position) in
ascending order, decimal point and space
available. If kept pressed, numerical
value continuously becomes small.
7.
Press
key to move cursor
to second digit position.
8.
Repeat the same procedures
6
. and
7
. as necessary.
Selectable frequency range is from 40.00Hz
to 200.00Hz. Press ESC to stop.
9.
Press
ENTER
key to show
<MENU>1/4 screen.
Now frequency has been set.
10
. Press
ESC
to return to
measurement screen.
Internal sync mode setting remains
even after switching OFF (O).
SYNC
MODE
<
SYNC MODE
>
NO SYNC
60.00Hz
(SYNC)
OK: [ENTER] CANCEL: [ESC]
[ ] [ 2° ]
<
SYNC MODE
>
NO SYNC
260.00Hz
(SYNC)
OK: [ENTER] CANCEL: [ESC]
[ ] [ 2° ]
<
SYNC MODE
>
NO SYNC 200.
00Hz
(SYNC)
OK: [ENTER] CANCEL: [ESC]
[ ] [ 2° ]
<
SYNC MODE
>
NO SYNC 2
60.00Hz
(SYNC)
OK: [ENTER] CANCEL: [ESC]
[ ] [ 2°]
CH00:
<
DEFAULT
>
Lv ------
cd/m
2
x ------
y ------
<
MODE
>
SINGLE
[ ] [ 2° ]
<
ANGL
>
1
°
VIEW
<
SPD
>
AUTO
<
SYNC
>
200.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
MOOO:(NO DATA)
Lv ------
x ------
y ------
<
MENU
>
1/4
CH SETTING
MEAS MODE SINGLE
SYNC MODE
DELETE
BREAK : [ESC]
[ ] [ 2° ]