Filter
Top Products
52
Setting
Buzzer Setting
This instrument usually generates buzzer sound for key operation, but setting for buzzer
sound is switchable. Buzzer for measurement, operation, and error can be set indepen-
dently.
∗ Setting at the shipment from factory : ON for MEASUREMENT, OPERATION, and WARNING
Operation Procedure
1.
Press
ESC
key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [ ] appears on left
bottom indicating this instrument
has not been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press SHIFT key to cancel SHIFT mode.
3.
Press [MENU] key three times.
Menu 3/4 screen appears on LCD screen.
4.
Press either
or
key to select
[BUZZER] and then [ENTER] key.
<BUZZER> screen appears.
2 3 1, 9 7 4, 5, 6
BUZZER
<
MENU
>
3/4
SLEEP MODE OFF
DATE & TIME
BUZZER
VERSION
BREAK : [ESC]
[ ] [ 2° ]
CH00:
<
DEFAULT
>
Lv 20.80
cd/m
2
x 0.4476
y 0.4477
<
MODE
>
SINGLE
[ ] [ 2° ]
<
ANGL
>
1
°
VIEW
<
SPD
>
AUTO
<
SYNC
>
200.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
MOOO:(NO DATA)
Lv ------
x ------
y ------
<
MENU
>
3/4
SLEEP MODE OFF
DATE & TIME
BUZZER
VERSION
BREAK : [ESC]
[ ] [ 2° ]