Filter
Top Products
56
Setting
Setting Sleep Mode
Sleep mode can be set for saving electric power consumption for the case that key has
not been operated or communication has not been done for more than 30 minutes.
∗ Setting at the shipment from factory : OFF
Operation Procedure
1.
Press
ESC
key when menu or target
value setting menu appears.
Measurement screen appears on LCD screen.
2.
Make sure that [ ] appears on left
bottom indicating this instrument
has not been set for SHIFT mode.
If [SFT] appears instead, it means that
instrument is to operate in SHIFT mode.
Press SHIFT key to cancel SHIFT mode.
3.
Press
MENU
key three times.
Menu 3/4 screen appears on LCD screen.
4.
Press
ENTER
key.
Inversion cursor moves from [SLEEP MODE]
to right to change setting for sleep mode.
2 3 1, 7 4, 6 5
SLEEP
MODE
<
MENU
>
3/4
SLEEP MODE OFF
DATE & TIME
BUZZER
VERSION
BREAK : [ESC]
[ ] [ 2° ]
CH00:
<
DEFAULT
>
Lv 20.80
cd/m
2
x 0.4476
y 0.4477
<
MODE
>
SINGLE
[ ] [ 2° ]
<
ANGL
>
1
°
VIEW
<
SPD
>
AUTO
<
SYNC
>
200.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
MOOO:(NO DATA)
Lv ------
x ------
y ------
<
MENU
>
3/4
SLEEP MODE OFF
DATE & TIME
BUZZER
VERSION
BREAK : [ESC]
[ ] [ 2° ]