Filter
Top Products
94
Error Messages and Recovery
Error messages are displayed on the LCD monitor when errors occur with the
camera.
Error Messages and Recovery
Error Message Recovery
The card cover is open. Close the memory card cover.
A card does not exist in the specified slot.
Place a memory card in the specified slot, or
change the memory card setting with [7 Storage].
Remove the memory card, and then replace it. If
Replace the card. the same message is displayed, replace it with a
different memory card.
The card is not formatted. Format the memory card.
FOLDER No. FULL. Cannot create folder. Format the memory card.
CARD FULL. Cannot create folder.
The card is full up. Erase all unwanted images,
and then try again to create a folder.
CARD FULL. The card is full.
The card is full up. Either erase all unwanted
images, or replace the memory card.
Protected.
The images on the memory card are protected.
Release the SD memory card lock switch.
No images.
Replace the memory card with one that contains
recorded images.
Cannot playback this image.
The image format cannot be played back with the
camera.
Cannot zoom this image. The image cannot be enlarged.
Processing. Please wait.
09_ZD back_E_p091-094 07/3/9, 20:4494