Filter
Top Products
87
Reference—Image Overlay and Multiple Exposure
6
Press the multi selector up or down to highlight
Done and press the multi selector to the right.
A icon will be displayed in the control panel.
7
Frame a photograph, focus, and shoot. In con-
tinuous high-speed or continuous low-speed
mode ( 26), the camera will record all expo-
sures in a single burst. In single-frame shooting
mode, one photograph will be taken each time the shutter-release but-
ton is pressed; continue shooting until all exposures have been recorded.
Shooting will end automatically if:
• No operations are performed for 30 s during shooting, or for 30 s after the
monitor has turned off during playback or menu operations
• The user selects Reset or Cancel in the mul-
tiple exposure menu and presses the multi se-
lector to the right
• The camera is turned off
• The battery is exhausted
• Pictures are deleted
If shooting ends before the specifi ed number of exposures have been
taken, a multiple exposure will be created from the exposures that have
been recorded to that point. If Auto Gain is on, gain will be adjusted to
refl ect the number of exposures actually recorded. To end shooting with-
out creating a multiple exposure, press the button while turning the
camera off .
The icon will blink until shooting ends.
When shooting ends, multiple exposure mode
will end and the icon will no longer be dis-
played. Repeat steps 1–7 to take additional mul-
tiple exposures.