Filter
Top Products
104
The Setup Menu
General Camera Setup
Vibration reduction
Reduce blurring caused by camera shake when
shooting. The default setting is Normal.
•
If a comparatively large camera shake is likely to occur
when shooting from a car or under poor foothold
conditions, set
Vibration reduction
to
Active
.
• When using a tripod to stabilize the camera, set this
feature to Off to prevent this feature from
malfunctioning.
• If this feature is assigned to the w (function) button
using Fn button, its setting menu can be also
displayed on the screen by pressing the w
(function) button during shooting (A71).
E69
Motion detection
When the camera detects camera shake or subject
movement at the time of shooting, it automatically
increases ISO sensitivity and shutter speed to reduce
blurring. The default setting is Off.
The r indicator lights in green when the camera
detects camera shake or subject movement and
increases shutter speed.
• When using certain shooting modes or settings,
motion is not detected. In this case the r indicator is
not displayed.
E70
AF assist
When set to Auto (default setting), the AF-assist
illuminator (A30) lights if shooting in dark
surroundings to help the camera focus.
• Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area
or the scene mode that is selected.
E71
Digital zoom
When set to On (default setting), rotating and holding
the zoom control toward g (i) triggers the digital
zoom (A29) if the optical zoom is at the maximum
telephoto zoom position.
• The digital zoom cannot be used simultaneously in
certain settings such as shooting mode.
E71
Assign side zoom
control
Select the function to be performed during shooting
when the side zoom control is rotated. When set to
Zoom (default setting), the zoom control operation is
enabled.
E72
Sound settings
Turn various camera sounds on and off. In the default
setting, beep sounds are on.
• The operation sound is disabled in certain settings
such as shooting mode.
E73
Auto off
Set the amount of time that passes before the monitor
is turned off to save power. The default setting is 1 min.
E73
Option Description A