Filter
Top Products
E69
The Setup Menu
Reference Section
Vibration Reduction
Compensate camera shake. Camera shake is also compensated when recording
movies as well as when shooting still images.
• When using a tripod to stabilize the camera, set vibration reduction to Off.
The icon for the current setting other than Off is displayed on the monitor (A12).
B Notes on Vibration Reduction
• Immediately after the power is turned on or the camera enters shooting mode from playback
mode, wait until the monitor screen stabilizes before shooting.
• Due to the characteristics of the vibration reduction function, images displayed on the monitor
screen immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When the X (Night landscape) or Night portrait scene mode is set to Tripod, the camera shake
is not compensated even if Vibration reduction is set to Normal or Active.
Press the d button M z tab (A10) M Vibration reduction
Option Description
g
Normal
(default setting)
Compensate camera shake that commonly occurs when shooting at
the telephoto zoom position or slow shutter speed. The camera
automatically detects the panning direction and only compensates
for vibration caused by camera shake.
When the camera is panned horizontally, for example, vibration
reduction only reduces vertical shake. If the camera is panned
vertically, vibration reduction only compensates for horizontal shake.
Z
Active
Camera shake is automatically compensated during shooting if a
comparatively large camera shake is likely to occur when
shooting from a car or under poor foothold conditions.
k Off
Vibration reduction is not enabled.