Nikon 26397 Digital Camera User Manual


 
E80
The Setup Menu
Reference Section
Eye-Fi Upload
B Notes on Eye-Fi Cards
Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
Remove the Eye-Fi card from the camera in a place where the use of radio waves is prohibited.
Signals may be transmitted even if Disable is selected.
Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
The camera can be used to turn
Eye-Fi
cards on and off, but may not support other
Eye-Fi
functions.
The camera is not compatible with the endless memory function. When it is set on a computer,
disable the function. If the endless memory function is enabled, the number of pictures taken may
not be displayed correctly.
Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.
C Eye-Fi Communication Indicator
The communication status of the Eye-Fi card in the camera can be confirmed on the monitor
(A12).
w: Eye-Fi upload is set to Disable.
x (lights): Eye-Fi upload enabled; waiting to begin upload.
x (flashes): Eye-Fi upload enabled; uploading data.
z: An error occurred. The camera cannot control the Eye-Fi card.
Reverse Indicators
Change the +/- display direction of the exposure indicator (A51) displayed when
shooting mode is m.
The + side of the indicator is up and - side is down in the default setting.
Press the d button M z tab (A10) M Eye-Fi upload
Option Description
b
Enable
(default setting)
Upload images created by the camera to a preselected
destination when an Eye-Fi card is in the camera.
c Disable Images will not be uploaded.
Press the d button M z tab (A10) M Reverse indicators