Filter
Top Products
E60
GPS Options Menu
Reference Section
B Notes on Updating A-GPS File
• The A-GPS file is disabled when a position is determined for the first time after the camera is
purchased. The A-GPS file becomes active from the second operation for determining a location.
• The validity period of the A-GPS file can be checked on the update screen. If the validity period has
expired, it is displayed in gray.
• Once the validity period of the A-GPS file has expired, tracking of the position information will not
become faster. Updating of the A-GPS file before using the GPS feature is recommended.
Points of Interest (POI) (Recording and Displaying Location
Name Information)
This shows how to set the POI (point of interest, location name information).
C POI Display
• If there is no location name information in the display level that was set, “---” is displayed.
• The location name information (Point of Interest: POI) function is not provided for the COOLPIX
P520 sold in China and the Republic of Korea.
Press the d button M z (GPS options) tab (A10) M Points of interest (POI)
Option Description
Embed POI
When set to On, the location name information is recorded on the
pictures to be shot.
• The default setting is Off.
• The location name information can be recorded on a still image or
movie.
Display POI
When set to On, the location name information is displayed on the
shooting and playback screens (A12, 14).
•
If
Embed POI
was set to
On
when a picture was taken, the location
name information for the picture is displayed on the playback screen.
• The default setting is Off.
Level of detail
Set the display level of the location name information. A higher
display level shows more detailed regional information.
• When set to level 1: country names are displayed.
• When set to levels 2 to 5: the information displayed varies
depending on the country.
• When set to level 6: landmark names (facilities) are displayed.
Edit POI
If Update POI is selected during playback mode, the location name
information recorded on the image can be changed. Select the image
you want to edit, before pressing the d button.
• When level 6 is selected, press the multi selector J or K to change
the landmark name.
•
To change the POI information level, press the multi selector
H
or
I
.
If Remove POI is selected, the location name information recorded
on the image is deleted.