Nikon 26397 Digital Camera User Manual


 
18
The Basics of Shooting and Playback
Preparation 2 Charge the Battery
1 Prepare the included Charging AC Adapter EH-69P.
If a plug adapter* is included with your camera, attach the plug adapter
to the plug on the Charging AC Adapter. Push the plug adapter firmly
until it is securely held in place. Once the two are connected, attempting
to forcibly remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or
region in which the camera was purchased.
The Charging AC Adapter comes with the plug adapter attached in
Argentina and Korea.
2 Make sure the battery is inserted in the camera, and then connect the
camera to the Charging AC Adapter in order of
1 to 3.
Keep the camera turned off.
When connecting the cable, be sure that the plug is properly oriented. Do not use
force when connecting the cable to the camera. When disconnecting the cable, do
not pull the plug at an angle.
When charging starts, the charge lamp flashes slowly in green.
About 4 hours and 30 minutes are required to charge a fully exhausted battery.
When the battery has been completely charged, the charge lamp turns off.
See “Understanding the Charge Lamp” (A19) for more information.
3 Disconnect the Charging AC Adapter from the electrical outlet and
then disconnect the USB cable.
Charge lamp
Electrical outlet
USB Cable UC-E6 (included)