Filter
Top Products
147
Technical Notes
Flash does not
fire
• Flash is off. Note that flash turns off automatically when:
The Mode Dial is set to (landscape assist; except for
GROUP RIGHT and GROUP LEFT), (sports assist),
(movie), or (scene) mode with any of
(SUNSET), (DUSK/DAWN), (NIGHT LAND-
SCAPE), (MUSEUM) or (FIREWORKS SHOW)
selected in the scene menu
Continuous is set to option other than Single
BSS is On
Auto bracketing is set
44
33, 34,
55, 37 -
40
89
91
96
Colors are unnat-
ural
• White balance does not match light source. 86
Picture or voice
memo can not be
played back
• Picture or voice memo has been overwritten or renamed
by computer or by another make of camera. –
Copy can not be
created using
small picture,
crop, or D-Light-
ing
• Picture is a movie. Retouched copy can be created only
for still pictures.
• Picture is a retouched copy.
• There is not enough free space in the memory or on the
memory card to store new copy. Delete unwanted pic-
tures from the memory to make free space.
112
59, 112
107
Can not zoom in
on picture
• Picture is a movie.
• Picture was created with Small pic. option.
• Picture has been cropped to sizes of 320×240 pixels or
smaller.
55
112
60
PictureProject
does not start
when camera is
connected or
memory card
inserted in card
reader or card
slot
• Camera is off.
• EH-62A AC adapter kit (optional) is not properly con-
nected, or battery is exhausted.
• UC-E6 USB cable is not correctly connected, or card not
properly inserted in card reader or card slot.
• USB in the Interface menu set to PTP when camera
connected to computer running Windows 2000 Profes-
sional, Windows Millennium Edition (Me), or Windows
98 Second Edition (SE).
• Camera is not registered in Device Manager (Windows
only).
See PictureProject Reference Manual (on CD) for further
information.
14
137
67
67
–
Problem Possible cause