Filter
Top Products
64
More on Playback
Viewing Pictures on TV
The EG-CP14 audio/video (A/V) cable provided with your camera can be used
to connect the camera to a television or video-cassette recorder (VCR).
Choosing Video Mode
Video mode in the Interface option of the camera Set-up menu offers a choice of
NTSC and PAL standards ( 132). Be sure that the standard selected matches that
used in the device.
1
Turn the camera off
Turn the camera off before connecting or dis-
connecting the A/V cable.
2
Connect the A/V cable to the camera
Open the Interface connector Cover and
insert the black plug of the A/V cable into the
camera’s Audio/Video (A/V) out Connector.
Check to be sure the connector is in the
correct orientation and insert the plug
straight. Do not insert or disconnect it
forcibly.
3
Connect the A/V cable to the televi-
sion or VCR
Insert the yellow plug of the A/V cable into
the video-in jack on your television or VCR
and the white plug into the audio-in jack.
4
Tune the television to the video channel
For more information, see the manual for
your television or VCR.
5
Turn the camera on
Press the Button for at least two seconds to
turn the camera on. The camera monitor will
turn off and the television will display the
image normally shown in the monitor.