Filter
Top Products
86
Displaying Maps
Using GPS/Displaying Maps
When Using Playback Mode
If an image displaying z in the full-frame display
is selected and the U (map) button is pressed,
the image shooting location is displayed on the
screen.
• To display the map and the image shooting
location, the position information must have
been recorded on playback image.
• To adjust the scale of the map, use the zoom
control (f (h)/g (i)).
• To move the map display, press the multi
selector H, I, J or K.
• When the k button is pressed, another image can be selected. Only images
with the recorded position information are displayed in the thumbnail display.
• When you play back pictures shot while the altimeter log or water depth log is
recorded by Create log (A89), and if the k button is pressed, the altimeter
log or water depth log graph (E67) is displayed.
• The image shooting location and a rough direction
are indicated by
C on the map (C indicates north),
and the selected image is highlighted in yellow.
• Press the multi selector J or K to select the image.
• Operate the zoom control toward g (i) to enlarge
the image. Operate the zoom control toward f
(h) to return to the map display.
500m
Scale
Location name
information (A84)
500m
500m
m / time
0 10 20 30 40 50 60
20
40
60
80
100
0
Map display Map display
(When the thumbnail
display mode is selected)
Altimeter log or
water depth log
Graph display
Image shooting location
and direction
Thumbnail display
500m