Nikon AW110 Digital Camera User Manual


 
96
The Setup Menu
General Camera Setup
Auto off
Set the amount of time that passes before the monitor
is turned off to save power. The default setting is 1 min.
E78
Format memory/
Format card
Format the internal memory (only when a memory card
is not inserted) or the memory card (when a memory
card is inserted).
All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to transfer important
images to a computer and save them before
formatting.
E79
Language Change the camera’s display language.
E79
TV settings
Adjust settings for connection to television.
When the camera is connected to a television using
an audio/video cable but no picture is displayed on
the television, set Video mode to NTSC or PAL
according to the type of signal compatible with the
television.
HDMI settings can be set.
E80
Blink warning
When the camera detects that a human subject may
have closed the eyes immediately after taking a picture
using face detection while shooting with modes other
than the smart portrait (A62), the Did someone
blink? screen is displayed on the monitor to check the
picture taken. The default setting is Off.
E81
Wi-Fi options
To connect the camera to your smart device, set the
Wi-Fi network (wireless LAN) to on. You can also change
network information such as the camera's SSID and
password.
E82
Eye-Fi upload
Set whether or not to enable the function for sending
images to a computer using a commercially available
Eye-Fi card. The default setting is Enable (when an Eye-
Fi card is in the camera).
E84
Reset all
Reset the camera’s settings to their default values.
Some of the settings such as Time zone and date
and Language are not reset.
E85
Firmware version Display the current camera firmware version.
E88
Option Description A