Nikon AW110 Digital Camera User Manual


 
F17
Troubleshooting
Technical Notes and Index
Wi-Fi
Unable to display
the altimeter or
depth gauge even
when Altimeter/
depth gauge is
set to On.
Even when Altimeter/depth gauge is set to On, the altimeter
or depth gauge is not displayed in the following situations.
When the shutter-release button is pressed halfway
During shooting in the Easy panorama scene mode
During movie recording
When a subject is registered using Subject tracking of AF
area mode
When a message is being displayed
40
77
58,
E39
Water depth
shows 0 m
The water depth will be displayed as 0 m if the camera is not
submerged under water when the Underwater scene mode is
selected.
43
Unable to select
Use GPS data of
Alt./depth
correction in the
GPS options menu.
•Record GPS data in the GPS options menu is set to Off.
You cannot select this function unless signals are being
received from four or more satellites and positioning is being
performed.
The camera is submerged under water. You cannot select this
function during underwater shooting.
82
84
Unable to select
Create log in the
GPS options menu.
Clock not set.
Set date and time.
94,
E69
Unable to select
Start all logs or
Start GPS log.
•Record GPS data in the GPS options menu is set to Off.
The camera is recording log data. To record a new log, select
End all logs or End GPS log, and end the log currently being
recorded.
82
89,
E62
Unable to save log
data.
Be sure that a memory card is inserted in the camera.
Up
to 36 log data events for GPS logs can be recorded per day
whereas up to 34 log data events each for altitude logs and
water depth logs can be recorded per day.
The total number of log data events that can be saved on a
single memory card is 200, which includes up to 100 log data
events for GPS logs and up to 100 log data events for a
combined total of altitude logs and water depth logs. Delete
log data that is no longer required from a memory card or
replace the memory card with a new one.
E63,
E64
Problem Cause/Solution
A
SSID (network
name) of the
camera is not
displayed on the
smart device.
Check whether the Wi-Fi network is set to On.
Turn off the Wi-Fi function of the smart device and then turn it on
again.
92
Problem Cause/Solution
A