Nikon AW110 Digital Camera User Manual


 
F16
Troubleshooting
Technical Notes and Index
GPS
Problem Cause/Solution
A
Unable to identify
the location or it
takes time to
identify the
location.
The camera may not be able to identify the location in some
shooting environments. To use the GPS feature, use the
camera as much as possible in an open-air area.
When positioning for the first time or when positioning was
unable to be performed for about two hours, it takes a few
minutes to obtain the positioning information.
83
83
Unable to record
position
information on
shot images.
When z or y is displayed on the shooting screen, the position
information is not recorded. Before shooting pictures, make sure
that the camera is receiving a GPS signal at sufficient strength.
84
Difference
between the
actual shooting
location and
recorded position
information.
The acquired position information may deviate in some shooting
environments. When there is a significant difference in the
signals from the GPS satellites, there could be a deviation of up to
several hundred meters.
83
An incorrect
location name is
recorded or the
correct location
name is not
displayed.
The desired landmark name may not be registered or an
incorrect landmark name may be displayed.
Unable to update
the A-GPS file.
Check the following items.
- Whether the memory card is inserted
- Whether the A-GPS file is stored on the memory card
- Whether the A-GPS file saved on the memory card is more
recent than the A-GPS file saved in the camera
- Whether the A-GPS file is still valid
The A-GPS file may be corrupted. Download the file from the
website once more.
88,
E59
Unable to turn off
the altimeter or
depth gauge.
When Altimeter/depth gauge of Altitude/depth options in
the GPS options menu is set to On, the altimeter or depth gauge
is always displayed regardless of Monitor settings in the setup
menu.
To turn off the altimeter or depth gauge, set the Altimeter/
depth gauge to Off.
90,
E67
The altimeter or
depth gauge and
atmospheric
pressure icon
remain displayed
on the shooting
screen.
Set Photo info of Monitor settings in the setup menu to Hide
info.
94,
E
71