Filter
Top Products
E92
Error Messages
Reference Section
Travel destination is in
the current time zone.
Destination in same time zone as home. –
Lens error
Lens error occurred.
Turn the camera off and then on again. If the error persists,
contact retailer or Nikon-authorized service representative.
21
Communications
error
Error occurred during communication with printer.
Turn off camera and reconnect the USB cable.
E22
System error
Error has occurred in camera’s internal circuitry.
Turn off camera, remove and reinsert battery, and turn on
camera. If the error persists, contact retailer or Nikon-authorized
service representative.
21
Initializing lens.
Cannot focus.
The camera cannot focus.
Wait until the camera recovers automatically.
–
Could not obtain GPS
data.
The camera clock is not set correctly.
Change the location or time and determine the location again.
–
No A-GPS file found
on card
An A-GPS file that can be updated is not found on the memory
card.
Check the following items.
• Whether the memory card is inserted
• Whether the A-GPS file is stored on the memory card
• Whether the A-GPS file saved on the memory card is more
recent than the A-GPS file saved in the camera
• Whether the A-GPS file is still valid
–
Update failed
Unable to update A-GPS file.
The A-GPS file may be corrupted. Download the file from the
website once more.
88,
E59
Unable to determine
current position
Unable to determine the current position when distance is
calculated.
Change the location or time and determine the location again.
–
Cannot save to card
A memory card is not inserted.
Insert a memory card.
18
The maximum number of log data events that can be saved per
day has been exceeded.
• GPS log: Up to 36 log data events per day
• Altitude and water depth logs: Up to 34 log data events each
per day
–
The maximum number of log data events that can be saved in
one memory card has been exceeded.
• GPS log: Up to 100 log data events
• Altitude log and water depth log: Combined total of up to
100 log data events
Replace the memory card with a new one or delete log data
that is no longer required from a memory card.
E64
Display Cause/Solution A