Filter
Top Products
E62
GPS Options Menu
Reference Section
Create Log (Record the Log of Moving Information)
When log recording starts, the measured moving information is recorded until a
preset time has elapsed at the interval set for Log interval.
• The recorded log data cannot be used by itself. To use the data, end log
recording and save it to a memory card.
1 Use the multi selector to select a log to be
recorded, and press the k button.
• Select a log to be recorded from the following logs.
- Start all logs: The position information, altitude and
water depth information log data is recorded.
- Start GPS log: The position information log data is
recorded.
- Start depth log: The water depth information log data is recorded.
2 Select the log interval that will be used for
recording a log, and press the k button.
• The intervals that can be set for recording a log vary
depending on the log to be recorded.
3 Select the duration that the log will be
recorded, and press the k button.
• Log recording starts.
• The log data is recorded at the interval set for the Log
interval until the preset time is reached.
• When Start depth log is selected, the duration for
recording the log cannot be selected. The duration for
recording the log is fixed at 1 hour.
• D is displayed on the screen during log recording
(A10).
Press the d button M z (GPS options) menu icon (A8) M Create log
End depth log
Start depth log
End GPS log
Start GPS log
End all logs
Start all logs
Create log
10 min
5 min
3 min
1 min
30 s
15 s
Log interval
Log data for next 72 hrs
Log data for next 24 hrs
Log data for next 12 hrs
Log data for next 6 hrs
Start log
1010hPa
1010hPa
1010hPa
15m
15m
15m
29m 0s
29m 0s
29m 0s
970
970
970
Log display (GPS)
Log display (altitude
or water depth)