Filter
Top Products
E22
Reference Section
Connecting the Camera to a Printer (Direct Print)
Users of PictBridge-compatible (F26) printers can connect the camera directly to
the printer and print pictures without using a computer.
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
• Check the printer settings.
3 Connect the camera to the printer using the included USB cable.
• Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull
the plug at an angle.
4 Turn on the camera.
• When connected correctly, the PictBridge startup screen (1) is displayed on the
monitor screen of the camera. Then the Print selection screen (2) is displayed.
B Notes on Power Source
• When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
•
If the AC Adapter EH-62F (available separately) (
E
96) is used, the COOLPIX AW110 can be
powered from an electrical outlet. Do not, under any circumstances, use an AC adapter other than
the EH-62F. Failure to observe this precaution could result in overheating or damage to the camera.
15/05/2013 No. 31 [ 32]
Print selection