Filter
Top Products
181
Setup Menu
Basic Camera Setup
Auto Off
If no operations are performed for a certain period while the camera is on, the
monitor is turned off to save power and the camera enters standby mode (A19).
In this menu, set the time before the camera enters standby mode.
Choose from 30 s, 1 min (default setting), 5 min and 30 min.
C When the Monitor Is Turned Off to Save Power
• The power-on lamp blinks in standby mode.
• The camera turns off when the standby mode continues for about three minutes.
• When the power-on lamp blinks, turn on the monitor again with one of the following operations.
- Press the power switch, shutter-release button or the c button.
- Rotate the mode dial.
B Auto Off Setting
In the following situations, the time taken for the camera to enter standby mode is fixed.
• When menus are displayed: three minutes
• When tone level information is displayed (shooting mode): three minutes
• During slideshow playback: maximum of 30 minutes
• When the AC adapter EH-5a is connected: 30 minutes
Press the d button M z (Setup menu) (A168) M Auto off