Nikon COOLPIXP7000 Digital Camera User Manual


 
18
First Steps
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL14 (supplied) into the camera.
Charge the battery before first use or when the battery is running low (A16).
1
Open the battery-chamber/memory card
slot cover.
Slide the cover latch to the Y side (1), and open
the cover (2).
2
Insert the battery (supplied).
Confirm that the positive (+) and
negative (–) terminals are
oriented correctly, as shown on
the label at the entrance of the
battery chamber, and insert the
battery.
Use the battery to push the
orange battery latch in the
direction shown (1), and fully
insert the battery (2).
When the battery is fully inserted, the battery latch locks it in place.
B Inserting the Battery Correctly
Inserting the battery upside down or backwards could damage the camera. Be
sure to confirm that the battery is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
Close the cover (1), and slide the cover latch to the Z
position (2).
Battery chamber