Nikon COOLPIXP7000 Digital Camera User Manual


 
iii
For Your Safety
Observe caution when handling
the battery
The battery may leak or explode if
improperly handled. Observe the
following precautions when handling
the battery for use in this product:
Before replacing the battery, turn the
product off. If you are using an AC
adapter, be sure it is unplugged.
Use only a Rechargeable Li-ion
Battery EN-EL14 (supplied). Charge
the battery by inserting it in a Battery
Charger MH-24 (supplied).
When inserting the battery, do not
attempt to insert it upside down or
backwards.
Do not short or disassemble the
battery or attempt to remove or
break the battery insulation or casing.
Do not expose the battery to flame
or to excessive heat.
Do not immerse in or expose to
water.
Replace the terminal cover when
transporting the battery. Do not
transport or store with metal objects
such as necklaces or hairpins.
The battery is prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove the
battery when no charge remains.
Discontinue use immediately should
you notice any change in the battery,
such as discoloration or deformation.
If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty of
water.
Observe the following precautions
when handling the Battery
Charger
Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could result
in fire.
Do not handle the plug or go near
the Battery Charger during lightning
storms. Failure to observe this
precaution could result in electric
shock.
Do not damage, modify or forcibly
tug, place it under heavy objects, or
expose it to heat or flames. Should
the insulation be damaged and the
wires become exposed, take it to a
Nikon-authorized service
representative for inspection. Failure
to observe these precautions could
result in fire or electric shock.
Do not handle the plug or Battery
Charger with wet hands. Failure to
observe this precaution could result
in electric shock.
Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.