38
Basic Photography and Playback: A (Auto) Mode
Shooting with Remote Control
Use the remote control ML-L3 (available separately) (A200) to release the shutter.
It is convenient for taking self-portraits and effectively eliminates blur caused by
camera shake that occurs when the shutter-release button is pressed.
• Use of a tripod is recommended during shooting with the remote control. Set
Vibration reduction (A175) in the setup menu (A167) to Off when using a
tripod to stabilize the camera.
1
Press n (self-timer) on the rotary multi
selector.
• The self-timer menu is displayed.
2
Choose Remote control mode using the rotary
multi selector and press the k button.
• Z (quick-response remote): Press the send button on
the remote control to shoot instantly.
• Z 10s (ten seconds remote): Press the send button on
the remote control to shoot ten seconds after the
camera has focused.
• Z
2s
(two seconds remote): Press the send button on the remote control to shoot two
seconds after the camera has focused.
• The icon for the selected remote control mode is displayed.
• If the k button is not pressed within a few seconds, the selection is set and the setting
menu disappears.
3
Frame the picture.
Remote control
1/250
1/250
1/250
32
32
32
F5.6
F5.6
F5.6