Filter
Top Products
48
Clip metadata (AVCHD mode only)
You can add the video and audio formats, name of
the videographer, shooting location, text memos,
and other information to the video data you have
recorded on the memory card. This data is called
the clip metadata. (For display method, see page 64.)
There are two types of clip metadata: the data that
is recorded automatically during shooting, and the
data in the metadata upload le created on the
memory card which is loaded in the camera. (For
the clip metadata loading method, see page 49.)
Content of clip metadata
You can set the items underlined by loading the
metadata upload le on the memory card. Other
items are set automatically during shooting.
[CLIP PROPERTY / GLOBAL CLIP ID]:
This indicates the global clip ID that shows the
shooting status of the clip.
[CLIP PROPERTY / USER CLIP NAME]:
This indicates the name of the clip that the user
has set.
*1
[CLIP PROPERTY / VIDEO & AUDIO]:
This indicates the [FRAME RATE], [REC
RATE], [RESOLUTION], [PULL DOWN] system
and [AUDIO] (recording audio) of the recorded
image.
[CLIP PROPERTY / ACCESS]:
This indicates the [CREATOR] (name of
the person recording), [CREATION DATE]
(recording date), [LAST UPDATE DATE] (date
on which the data was last updated), and
[LAST UPDATE PERSON] (the person who last
updated the data).
[CLIP PROPERTY / DEVICE]:
This indicates the [MANUFACTURER]
(manufacturer of the equipment), [SERIAL NO.]
(serial number of the equipment) and [MODEL
NAME] (equipment model name: AG-AC160A
for this camera).
[CLIP PROPERTY / SHOOT]:
This indicates the [SHOOTER] (name of the
videographer) and the [PLACE NAME] (name
of shooting location).
[CLIP PROPERTY / LOCATION]:
This indicates [ALTITUDE], [LONGITUDE],
[LATITUDE] of the shooting location, and
[SOURCE] (information source). Not recorded
in this camera.
[CLIP PROPERTY / SCENARIO]:
*2
This indicates the [PROGRAM NAME], [SCENE
NO.] (scene number), and [TAKE NO.] (take
number).
[CLIP PROPERTY / NEWS 1]:
This indicates the [REPORTER] (name of the
reporter), and [PURPOSE] (purpose of data
collection).
[CLIP PROPERTY / NEWS 2]:
This indicates the [OBJECT] (target of data
collection).
[CLIP PROPERTY / MEMO]:
*3
This indicates the [PERSON] (name of the
person who recorded the text memo), and
[TEXT] (content of the text memo).
*1 If there is no information in the metadata upload
le, consecutive 5-digit numbers will be applied
to the clips in the order that they were recorded,
with the rst clip to be recorded given the number
0. The recording method of [CLIP PROPERTY /
USER CLIP NAME] is selectable. For details, see
page 49.
*2 When you input the [CLIP PROPERTY /
SCENARIO], you must input the [PROGRAM
NAME]. You cannot input [SCENE NO.], [TAKE
NO.] only.
*3 When you input a [CLIP PROPERTY / MEMO],
you must input the [TEXT]. You cannot input
[PERSON] only.
• This camera can only display ASCII
characters.
• Due to limitations imposed by the camera
on the number of characters which can be
displayed, not all the data can be displayed.
(This does not mean that data which is
not displayed has been deleted. ) Use an
AVCCAM viewer or other program to check all
the data.
• Metadata can be created with AVCCAM
viewer. (Page 73)