Filter
Top Products
68
Computer
File transfer/nonlinear editing
You can connect a computer to the camera using a USB 2.0 cable (optional) and transfer les.
USB 2.0
Mini-B
USB2.0 connection cable (optional)
Computer
•
For details on conditions of the computer and other factors, see page 72.
•
No USB2.0 connection cable is included with this camera. Use a commercial double-shielded USB2.0
connection cable (shielded for noise suppression).
1394 AVC transfer/nonlinear editing
You can connect a computer to the camera using an IEEE1394 cable (optional) and perform 1394
AVC transfer. (Only in DV mode)
•
Set the camera to the <PB> mode.
IEEE1394 cable (optional)
Computer
6-pin
•
When controlling the camera from a nonlinear editing device, you can operate the clip on the cursor
position in the thumbnail screen, which is displayed on the LCD.
•
When the camera cannot be controlled by the nonlinear editing device, operate the clip to import with the
camera.
•
When connecting and disconnecting an IEEE1394 cable, be sure to turn off the power of the device to be
connected.
•
When connecting an external device equipped with a 4-pin type IEEE1394 terminal, connect the <DV
OUT> terminal (6-pin) rst.
•
Use a double-shielded IEEE1394 cable.