Filter
Top Products
70
TV/Monitor
Only the output signals from the camera are shown.
TV/Monitor
Audio pin cable (optional)
White: CH1(LCH) audio
Red: CH2(RCH) audio
Connect the
one that
matches the
terminal of
TV/monitor
Video pin cable
(optional)
BNC cable
(optional)
HDMI cable
(optional)
When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
•
Use an HDMI cable (optional) with double-shield or higher.
•
It is recommended that you use an HDMI cable manufactured by Panasonic.
•
This camera is not compatible with VIERA Link.
•
Use a BNC cable (optional) with double-shield that is equivalent to 5C-FB to connect to <SDI OUT>
terminal.
Limitations of image output
•
When using <SDI OUT> output, the LCD monitor and the viewnder cannot be displayed simultaneously.
In order to display them simultaneously, set the [SDI OUT] item on the setup menu [AV OUT SETUP]
screen to [OFF]. When the [EVF MODE] item on the setup menu [DISPLAY SETUP] screen is set to
[AUTO], the viewnder display disappears upon opening/closing of the LCD monitor.
•
No <HDMI OUT> and <VIDEO OUT> will be output when the [REC FORMAT] item in the [RECORDING
SETUP] screen is set to [PH 1080/24P], and the [SDI 24PsF] item in the [AV OUT SETUP] screen is set
to [ON].
•
Some displays, such as time code display and audio level meter display may not be visible on the videos
output from the output terminal.