Filter
Top Products
96
[CARD FUNCTIONS] screen
Item
Display
mode
Description of settings
[CARD
FORMAT]
<CAMERA>
<PB>
Formats memory card.
[SLOT1]: Formats the memory card inserted in slot 1.
[SLOT2]: Formats the memory card inserted in slot 2.
[NO]: Returns to the previous screen.
[CARD
STATUS]
<CAMERA>
<PB>
Displays the memory card status.
[SLOT1]: Displays information about the memory card inserted in slot 1.
[SLOT2]: Displays information about the memory card inserted in slot 2.
[NO]: Returns to the previous screen.
[CLIP
PROPERTY]
<PB> Displays information about the selected clip.
[YES]: Displays clip information.
[NO]: Returns to the previous screen.
This can also be displayed using the <DISP/MODE CHK> button.
is the factory default mode.
[USER FILE] screen
Item
Display
mode
Description of settings
[CARD READ] <CAMERA>
<PB>
Reads the user les saved on the memory card.
[SLOT1]: Reads user les from the memory card inserted in slot 1.
[SLOT2]: Reads user les from the memory card inserted in slot 2.
[NO]: Returns to the previous screen.
•
When reading the user les with different system frequency, change the
system frequency on the camera in advance.
[CARD WRITE] <CAMERA>
<PB>
Saves user les on the memory card. You can also add a title to the saved les.
[SLOT1]: Saves user le on the memory card inserted in slot 1.
[SLOT2]: Saves user le on the memory card inserted in slot 2.
[NO]: Returns to the previous screen.
[LOAD/SAVE/
INIT]
<CAMERA>
<PB>
[LOAD]: Loads the settings in a previously stored user le.
[SAVE]: Saves the updated user le settings.
[INIT]: Returns the settings in the user le to the factory settings.
[NO]: Returns to the previous screen.
•
After performing [LOAD] or [INIT], turn POWER/MODE switch of the camera
OFF and then ON again to enable the new settings.
•
When [INIT] is executed, the setting value of the scene le, time code, the
[TIME ZONE] item, the [CLOCK SET] item, and the [TIME ZONE] item remain
unchanged.
is the factory default mode.