Filter
Top Products
58
Make settings for playback format and method.
Setting playback format [PB FORMAT]
(only in AVCHD mode)
Set format for playback.
1
Press the <MENU> button.
Menu operation (Page 31 of Vol. 1)
2
Select the [PB FORMAT] item in the [PLAY
SETUP] screen, and push the OPERATION
lever (or tilt in the
direction).
3
Tilt the OPERATION lever in the < >< >
directions to select the format for playback,
and push the OPERATION lever.
•
The setting for the [REC FORMAT] item
on the setup menu [RECORDING SETUP]
screen is reected as the initial setting.
•
Clip numbers will be displayed in black
where playback is possible, and in red where
playback is not possible.
•
Even if the playback format is set, the
recording format set in the [REC FORMAT]
item on the setup menu [RECORDING
SETUP] screen is restored when the camera
is switched to <CAMERA> mode.
•
If the playback format does not conform to the
clips created at the relay destination using the
relay recording function, thumbnail images
will not be displayed ([!] will be displayed).
Thumbnail images will be displayed when the
playback format is matched to the clips.
Repeat playback [REPEAT PLAY]
Use this setting to repeatedly play back all
available clips on the selected slot.
1
Press the <MENU> button.
Menu operation (Page 31 of Vol. 1)
2
Set the [REPEAT PLAY] item in the [PLAY
SETUP] screen to [ON].
3
Press the <MENU> button to return to the
thumbnail screen.
The repeat playback indicator will be displayed.
When the playback operation is performed, the
playable clips are played back repeatedly.
•
Repeat playback will continue until playback
is paused.
•
To turn the repeat playback setting [OFF],
select [OFF] in step
2
.
Playback settings [PLAY SETUP]