Filter
Top Products
88
[AUTO SW] screen
Item
Display
mode
Description of settings
[A.IRIS] <CAMERA>
[ON]: Activates auto iris control when in Auto mode. In this mode, the
<IRIS> button is disabled.
[OFF]: Deactivates auto iris control when in Auto mode. Performs iris control
operation selected using <IRIS> button.
[AGC] <CAMERA> Sets auto gain control operation when [ON] is selected in the [A.IRIS] item.
[OFF]: Deactivates auto gain control when in Auto mode. Performs gain
control operation selected using <GAIN> switch.
[6dB]: Activates auto gain control with a maximum of 6 dB when in Auto
mode.
[12dB]: Activates auto gain control with a maximum of 12 dB when in Auto
mode.
[18dB]: Activates auto gain control with a maximum of 18 dB when in Auto
mode.
[ATW] <CAMERA>
[ON]: Activates [ATW] (Auto Tracking White) function when in Auto mode.
At this time, the [ATW] function operation cannot be switched [ON]/
[OFF] using the <WHITE BAL> switch or the USER button. However,
if you have assigned [ATW LOCK] to the USER button, you can use
the USER button to x the white balance value.
[OFF]: Deactivates the [ATW] function when in Auto mode. Activates white
balance function selected using the <WHITE BAL> switch.
[AF] <CAMERA>
[ON]: Activates auto focus when in Auto mode. At this time, the <FOCUS>
switch is disabled.
[OFF]: Deactivates auto focus when in Auto mode. Performs focus operation
selected using <FOCUS> switch.
is the factory default mode.
Item
Display
mode
Description of settings
[LCD] <CAMERA>
<PB>
Sets the function assigned to the <LCD> button.
[LCD REV]:
Flips the image displayed on the LCD vertically and horizontally.
[LCD BL]:
Selects the brightness of the LCD backlight.
•
The setting selected using the <LCD> button is reected in the setting of the
[LCD BACKLIGHT] item on the [DISPLAY SETUP] screen.
[FACE
FRAMING]
<CAMERA> Frames the faces detected during operation of the [FACE DETECT] function
with the USER button. The maximum number of detected frames is 15, and
faces bigger and closer to the center of the screen are given priority.
[OFF]: Frames are not displayed.
[PRIMARY]: Displays only the high-priority frames.
[ALL]: Displays all frames.
•
Displays the high-priority frames with an orange border. Focuses on high-
priority frames and adjusts brightness.
is the factory default mode.