Filter
Top Products
5
Shooting
Using the viewnder
This camera utilizes a viewnder with a miniature
LCD, and a 3.45-inch LCD monitor.
Use them according to application and shooting
conditions.
•
Brightness and hue of images in the viewnder
and the LCD monitor may sometimes differ from
those on a TV monitor.
Check nal images with a TV monitor.
Using the viewnder
1
Turn the POWER/MODE switch of the
camera <ON> (Page 30 of Vol.1), and check
that images appear in the viewfinder.
2
Position the screen of the viewfinder where
it is easiest to see.
The viewnder can be raised to about 90°
perpendicular to the camera.
3
Adjust the diopter adjustment dial so that
you can see the characters on the finder
screen clearly.
Diopter adjustment dial
Viewfinder
•
Do not leave the eyepiece of the viewnder
pointed in the direction of the sun or strong
light sources.
Internal components may be damaged or re
may be caused if light is focused through the
lens.
• When the LCD monitor is open, the viewnder
may not display anything. Close the LCD
monitor. (Page 70)
• Less than 0.01% of the pixels in the LCD may
not light or remain on all the time. They are
not defective, and will have no effect on the
images you record.
• Screen burn-in may occur in the LCD monitor,
however, this is not a defect.
Shooting